Resources
Assembling your Madison Portier Bed
Assembly Guide
1. Remove all pieces from the protective plastic
Cut the corner of the plastic to allow air seal to break. Do not puncture the area where the product is placed.
2. Position long foam insert onto outer cover
Readjust the foam insert as needed to ensure the filling is evenly spaced. Align onto the outer cover with two ends placed where the cover connects. Zip the insert into the outer cover being mindful not to catch the casing in the zipper.
3. Fold zipper inward
Once zipper is fully zipped, turn the zipper inward into the bed so it’s positioned on the inner seam.
4. Insert pillow
Add pillow insert into the center of the bed. Using the 2 snaps on the inside of the bed, snap the pillow into place.
Sizing Guide
We want to make sure you get the perfect fit.
Our sizing chart below should help you decide which size to get. Size up by 1 or 2 sizes if you have pets sharing a bed!
We have included photos of various breeds and their weights to help you assess which size would best fit your pet.
Size
Width
Length
Height
Weight
XS
<7 Lbs
S
8-12 Lbs
M
13-20 Lbs
L
21-50 Lbs
XL
40-80 Lbs
Measurements are in inches
Note: The exterior measurements change based on how the bed is fluffed and configured.
Numbers provided are an estimate. Pillow measurements are exact.
Meet Captain, a 4lb yorkie, in our extra small size Halo Diamant Oval Orthopedic Pet Bed.
Meet Max, a 12lb dachshund, in our small size Halo Diamant Oval Orthopedic Pet Bed.
Meet Pink, a 19lb beagle, in our medium size Halo Diamant Oval Orthopedic Pet Bed.
Meet Bruno, a 35lb Mini Australian shepherd, in our medium size Halo Diamant Oval Orthopedic Pet Bed.
Meet Jamie, a 50lb catahoula leopard hound, in our large size Halo Diamant Oval Orthopedic Pet Bed.
Meet Monty, a 55lb Yellow Labrador retriever, in our extra large size Halo Diamant Oval Orthopedic Pet Bed.
